Artesprix Mixed Media Bag Tags Using Iron-on-Ink!

by | Jul 23, 2020 | Things to Do

Design beautiful Maple Bag Tags with a Sublimation Stamp Pad

Create beautiful Mixed Media art with Iron-on-Ink!

Hello, Iron-On-Inkers! Gina here with these mixed media bag tags using Artsprix Iron-on-Ink sublimation markers, the sublimation stamp pad, a fun new stamp, and my fave scrapbooking papers. I hope you love this Iron-on-Ink project as much as I do!

The links below are affiliate links. If you decide to make a purchase, you are supporting the today’s post writer at no extra cost to you, thank you! These products are endorsed by the author and we hope you’ll love them, too.

Bag tags with mixed media art and iron on ink

New to Sublimation? Here’s How It Works

Artesprix markers and the Artesprix Ink Pad allow you to create and color designs right on to plain copy paper-the the kind you use every day in your home printer! Transfer your designs with a heat source onto any polyester or poly-coated blank. The image will last forever! The heat turns the chemical into a gas that permeates the blank creating a lasting image.

What’s super cool about using Artesprix markers and ink on these cute maple bag tags is that they can be made double sided! Double the creative fun.

Materials:

Create the Mixed Media Bag Tags using Iron-on-Ink

mixed media bag tags using iron on ink

Step 1.

Use the Sublimation stamp pad to apply the Iron-on-Ink to your stamp/image. Stamp the image onto plain copy paper.

PRO-TIP:

Do not press too hard. You want a nice, clean image. Let the image dry for just a minute before coloring.

mixed media bag tags using iron on ink

Step 2.

Use the Artesprix sublimation markers to color in your stamped image.

PRO-TIP:

Store your Artesprix markers horizontally until you’re ready to use them. When you’re gathering your supplies and getting ready to craft, turn the markers on their ends, cap side down, in order to encourage the ink to flow downward to the tip.

Step 3.

Use the heat tape to secure the image, face down, onto the maple bag tag. This ensures a nice clean transfer and will prevent “ghosting.”

Note: Since my stamped image was bigger than the maple bag tag, I decided to use half of the image on the front and the other half on the back.

I simply cut the image and repeated all steps for transferring the second half to the back of my tag.

Step 4.

Turn on your heat source. The maple bag tags need to be pressed at 400 degrees for 45 seconds. Create a “sublimation sandwich” with two pieces of protective paper. Cut one piece bigger than your project. Lay the project on top of layer one. Cut another slightly larger piece of protective paper and place it on top of the project.

Your design needs to be down to your blank at the top of your sandwich so that it is close to the heat source. In this instance, the heat comes from the top of the Artesprix heat press.

Step 5.

Place the sublimation sandwich on the heat press and press for 45 seconds. Carefully remove the project and place it on the project mat and allow it to cool before removing the copy paper.

Step 6.

Repeat steps 1 through 5 to apply the script overlay.

sublimated text overlay using iron on ink and a maple bag tag

Turn Your Maple Bag Tags into Mixed Media Art

After I was finished sublimating the maple bag tags, I wanted to turn them into something extra special. I gathered my fave crafting supplies:

  • Scrap book paper
  • Letter stamps
  • Ink pad
  • Glue
  • Ribbon & burlap strips

Apply glue to the entire surface of the bag tag. Place scrapbook paper over the tag and cut to fit. Sand the edges and the surface to distress the paper. Use the ink pad to highlight the edges and the tag. Stamp desired sentiment.

To make it look like the butterfly was emerging from the paper, I tore the middle section of the paper over the butterfly and sanded the edges to distress.

Join in the Iron-on-Ink Fun!

Love this project? Join the Iron on Ink community on Facebook for more project ideas and to share your own creative iron on ink projects.

Don’t forget to save this to Pinterest and share with all your friends!

Hope you enjoyed this fun Iron on Ink project as much as I had creating it!

Til next time…

Gina

Gina K is a lifestyle and craft blogger at Desperately Seeking Gina.

You may also like…

Artesprix Sublimation Poly-Canvas Zip Case – Be A Unicorn!

Artesprix Sublimation Poly-Canvas Zip Case – Be A Unicorn!

Create A Cute D.I.Y Make-up bag using Artesprix Sublimation Markers Learn how to design a beautiful mixed media Unicorn Poly-Canvas Zip Case! Maria Russell on the blog with you today. Back with another fun project, using Artesprix's sublimation markers and ink pad...

Decorative Metal Panel using Artesprix Iron-on-Ink Markers!

Decorative Metal Panel using Artesprix Iron-on-Ink Markers!

Learn how to design a custom DIY Decorative Metal Panel for a craft room Create a Metal Panel Using Sublimation Iron-on-Ink and Silhouette! Hello everyone! Nicole from Artesprix Design Team. I decided to do something different! It involved me having to dust off my...

Artesprix Flocked Sublimation T-shirt Project!

Artesprix Flocked Sublimation T-shirt Project!

Sublimate a Cotton T-shirt Using Flock HTV and Artesprix Markers Learn how to design a customized Flocked HTV Artesprix Sublimation T-Shirt Project! Recently I learned that I could use Artesprix sublimation markers on flocked and glitter heat transfer vinyl so you are...

0 Comments

Trackbacks/Pingbacks

  1. Artesprix Sublimation Poly-Canvas Zip Case - Be A Unicorn! - Artesprix - […] If you like this project, you need to check out Gina Knuppenberg’s Mixed Media Bag Tags! […]

Submit a Comment

Your email address will not be published. Required fields are marked *