Bounty and Blooms Heart Ornament

Artesprix Design Team
Markers, Ornament, Stamp Pads

Hello! Nicole Martel on the blog this morning. I am so excited to be kicking off the month with the February Blank of the Month! This month, we have a new Heart Ornament in the shop! These beauties make wonderful gifts for Valentines Day! And I'm going to inspire you to make one today by the time you finish reading through this post! You'll even get to see a process video as well...so let's get to it! 


Materials:

Pastel and Original Sublimation Markers

Heart Ornament

Plain Copy Paper

Sublimation Stamp Ink Pad

Acrylic Stamp Block

Heat Tape

Protective Paper

Heat Source: Artesprix Heat Press, Dry Iron, or Home Iron

Artesprix Protective Project Mat

The Stamp Market's Bounty of Blooms Stamp Set


Step-by-Step Tutorial:


Step 1. Place the Heart Ornament on a plain piece of copy paper and trace the outline using a pencil to determine the area that you have to work on. Then, stamp the images within the heart using the Sublimation Ink Pad.

Heart Ornament

 

Heart Ornament

 

Helpful tip: Use a lightbox to create your mirrored texts.

Step 2. Color in the images using the Sublimation Markers. 

Heart Ornament

Heart Ornament

Heart Ornament

 

Step 3. Using the Artesprix Heat Tape, tape your blank down to your design.

 

Heart Ornament

Step 4. Turn your heat press on and set the temperature to 400 degrees Fahrenheit and the timer for 60 seconds. While the heat press was heating up, I started working on the back of the heart.

Step 5. Create your sublimation sandwich. Cut two pieces of Protective Paper to cover your project on the top and bottom. Place it inside the Heat Press (making sure image is facing up towards the heat press) and close the machine. The Heat Press will beep indicating that your project is finished!

Step 6. While wearing protective gloves, lift the handle and remove your heart ornament. Place it on the Protective Project Mat and give it about 2 minutes to cool down. Gently remove the paper to reveal your vivid design!

Step 7. Glue desired embellishments onto the bag and allow the glue to try. Tie a piece of ribbon or lace through the hole at the top of the ornament. 

 

Heart Ornament


There's still time to make a few of your own before Valentines Day! Stop by the shop and grab a few products to get started! Click here https://artesprix.com/?sscid=b1k4_o6fe9&  to start shopping.

 

Thanks so much for stopping by today!

- Nicole 

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.